High Temperature Tapes



Typical Application: Shielding of cables in high temperature environments (200°C) such as plenum, military and aerospace cables.

Construction:

Nomex® aramid paper, Kapton® polyimide film or other high temperature films laminated to aluminum or copper foil.

Features & Benefits:

Provides shielding in high temperature processing and end use environments without compromising dimensional stability.


Selecting the product that's right for you:

FILM
  • Polyimide film (Kapton®) provides a higher level of temperature resistance and dielectric strength than aramid paper. In addition, it is often more formable -- an advantage for small diameter cables.
PAPER
  • Aramid paper (Nomex®) is more effective than polyimide film (Kapton®) where temperature resistance and dielectric strength requirements allow.
FOIL
  • Aluminum is lightweight and cost effective.
  • Copper offers corrosion and radiation resistance, soldering at termination, and higher conductivity relative to aluminum
  • Thicker foil substrates provide higher conductivity and tensile strength, and lower signal attenuation.

Click on the links below for pdf copies of select data sheets:

Product #
Construction
Description
0.00100” (25µ) polyimide film
0.00100” (25µ) aluminum foil		High temperature laminate typically used to shield military and aircraft cables.
0.00100” (25µ) polyimide film
0.00070” ( 18µ) 0.5 oz. electrodeposited copper foil		Same as above
0.00100” (25µ) polyimide film
0.00035” (9µ) aluminum foil		Same as above
0.00035” (9µ) aluminum foil
0.00100” (25µ) polyimide film
0.00035” (9µ) aluminum foil		High temperature laminate typically used to shield military, coax and aircraft cables.
0.00100" (25µ) polyimide film1/16" (1.6 mm) wide high temperature identification tape printed with legend
0.00100" (25µ) polyimide film1/8" (3.2 mm) wide high temperature identification tape printed with legend
0.00100" (25µ) polyimide filmPolyimide core wrap for high temperature applications
0.00100" (25µ) printed polyimide film3/64" (1.2 mm) wide high temperature identification tape printed with legend and sequential footage markings.
0.00200” (51µ) Nomex® aramid paper
0.00035” (9µ) aluminum foil		Color coated shielding tape typically used in process control cable for continuous use in high temperature environments without disintegration.
0.00300" (76µ) Nomex® aramid paper1/16" (1.6 mm) wide high temperature identification tape printed with legend
0.00300" (76µ) printed Nomex® aramid paper1/8" (3.2 mm) wide high temperature identification tape printed with legend.
0.00300" (76µ) printed Nomex® aramid paper1/8" (3.2 mm) wide high temperature identification tape printed with legend and sequential footage markings.
0.00300" (76µ) printed Nomex® aramid paper3/16" (4.8 mm) wide high temperature identification tape printed with legend and sequential footage markings.
0.00230" (58µ) Nomex® aramid paperHigh temperature resistant slit aramid paper which wraps and binds conductors, separating them from cable fillers and jacketing materials.
0.00310" (79µ) Nomex® aramid paperSame as above

NOTE: You must have Acrobat Reader installed on your computer in order to view pdf files. You may obtain a free copy of the reader by clicking on the link below.